녹스 앱플레이어로 Jetting for IAME X30 & Leopard Kart Engines 플레이하기
더보기
This app provides, for the current weather conditions and a given engine configuration (engine model, gas, etc.), a jetting and exhaust length recommendation for IAME Parilla Leopard RL, X30 (Senior or Junior with Tillotson or Tryton carbs) and X30 Super 175 engines to get the best performance.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to enter the weather data.
The application is made up of four tabs that are described next.
- Results: In this tab, a recommended jetting and exhaust length setup are shown. These data are calculated depending on the weather conditions, the motor and track configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and exhaust length. Besides this information, the air density and density altitude are shown too. In addition, this tab lets do a fine tuning adjustment for the high and low needles to adapt to your concrete motor and carburetor.
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest public weather station (from the GPS tab).
- Engine: you can set in this screen the information about your engine, carburator and track, that is, the engine type (Leopard, X30 Senior, X30 Junior, X30 Super 175), the oil mix ratio and the type of the circuit (short or long tracks). Depending of the track type, the jetting setup will be adapted.
- GPS: This tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
If you click in "More from developer" you can find the other karting tools from ISEnet:
- Kart Chassis Setup, that helps you set up your chassis easily, for all brands: CRG, Tony Kart, Maranello, Birel, Intrepid, Energy, etc.
- Other carburation apps for go karts:
+ Rotax Max EVO and non-EVO.
+ TM KZ / ICC / Shifter (K9, K9B, K9C, KZ10, KZ10B).
+ Honda CR125 powered shifter go-kart.
+ Modena KK1 & KK1R
+ IAME Shifter, Screamer & SuperShifter
+ Yamaha KT100.
- Air Density Meter: if you don't find a specific jotting app for your engine, you can use this app to create jeting charts.
- Apps for MX bikes (KTM, Honda CR & CRF, Yamaha YZ, Suzuki RM, Kawasaki KX).
We're working in new carburetion apps for other kart motors (LKE, Maxter, TKM, Vortex, WTP, etc.) and a new tech apps for Alfano / Mychron visualization. Please send us and email if you want to be notified when these tools are published.
ERRORS AND SUGGESTIONS:
Please understand that because of the variety of phones, android versions, operators, etc. it's very hard to develop bug-free applications. If you find any bug, please, send us an email to [email protected] explaining, as detailed as you can, the error that you've detected. We'll try to fix it or give an answer as soon as possible.
PERMISSIONS:
The application needs the next permissions:
- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.
- Storage: it's used for storing the config preferences.
- Network communication: it's used for invoke the external service which provides the current weather conditions
- Phone calls (read phone state and identity): it allows to get the system identifier in order to validate the license status of the installed application.
In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to enter the weather data.
The application is made up of four tabs that are described next.
- Results: In this tab, a recommended jetting and exhaust length setup are shown. These data are calculated depending on the weather conditions, the motor and track configuration given in the following tabs. The following values are given: high needle, low needle, pop-off pressure and exhaust length. Besides this information, the air density and density altitude are shown too. In addition, this tab lets do a fine tuning adjustment for the high and low needles to adapt to your concrete motor and carburetor.
- Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest public weather station (from the GPS tab).
- Engine: you can set in this screen the information about your engine, carburator and track, that is, the engine type (Leopard, X30 Senior, X30 Junior, X30 Super 175), the oil mix ratio and the type of the circuit (short or long tracks). Depending of the track type, the jetting setup will be adapted.
- GPS: This tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
If you click in "More from developer" you can find the other karting tools from ISEnet:
- Kart Chassis Setup, that helps you set up your chassis easily, for all brands: CRG, Tony Kart, Maranello, Birel, Intrepid, Energy, etc.
- Other carburation apps for go karts:
+ Rotax Max EVO and non-EVO.
+ TM KZ / ICC / Shifter (K9, K9B, K9C, KZ10, KZ10B).
+ Honda CR125 powered shifter go-kart.
+ Modena KK1 & KK1R
+ IAME Shifter, Screamer & SuperShifter
+ Yamaha KT100.
- Air Density Meter: if you don't find a specific jotting app for your engine, you can use this app to create jeting charts.
- Apps for MX bikes (KTM, Honda CR & CRF, Yamaha YZ, Suzuki RM, Kawasaki KX).
We're working in new carburetion apps for other kart motors (LKE, Maxter, TKM, Vortex, WTP, etc.) and a new tech apps for Alfano / Mychron visualization. Please send us and email if you want to be notified when these tools are published.
ERRORS AND SUGGESTIONS:
Please understand that because of the variety of phones, android versions, operators, etc. it's very hard to develop bug-free applications. If you find any bug, please, send us an email to [email protected] explaining, as detailed as you can, the error that you've detected. We'll try to fix it or give an answer as soon as possible.
PERMISSIONS:
The application needs the next permissions:
- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.
- Storage: it's used for storing the config preferences.
- Network communication: it's used for invoke the external service which provides the current weather conditions
- Phone calls (read phone state and identity): it allows to get the system identifier in order to validate the license status of the installed application.
녹스 앱플레이어로Jetting for IAME X30 & Leopard Kart EnginesPC버전 즐기는 방법
1녹스 앱플레이어를 다운 받기
2녹스 앱플레이어를 설치하기
3검색창에 Jetting for IAME X30 & Leopard Kart Engines 검색하기
4녹스 스토어에서 게임 설치하기
5설치 완료 후 게임 실행하기
6PC에서 큰 스크린으로 발열 현상 없이 Jetting for IAME X30 & Leopard Kart Engines 즐겨 보세요!
빠른 설치
방법 1. "PC버전 다운로드"를 클릭하여 녹스 앱플레이어와 게임 APK 파일을 한 번에 다운로드할 수 있습니다. 다운로드한 후 앱플레이어 가동이 가능합니다.
방법 2. 녹스 앱플레이어가 이미 설치된 경우는, "APK 다운로드" 클릭하여 파일을 다운로드 후에 해당 파일을 앱플레이어에 드래그하시면 자동 설치 가능합니다.
Jetting for IAME X30 & Leopard Kart Engines 녹스 플레이 영상
Jetting for IAME X30 & Leopard Kart Engines, 아직도 핸드폰으로 Jetting for IAME X30 & Leopard Kart Engines 플레이하고 계시나요? 녹스 앱플레이어로 Jetting for IAME X30 & Leopard Kart Engines 플레이하면 더 큰 스크린으로 게임을 체험할 수 있으며 키보드, 마우스를 이용해 더 완벽하게 게임을 컨트롤할 수 있습니다. PC로 녹스에서 Jetting for IAME X30 & Leopard Kart Engines 게임 다운로드 및 설치하고 핸드폰 배터리 용량을 인한 발열현상을 걱정 안하셔도 되니까 매우 편할 겁니다.
최신버전의 녹스 앱플레이어에서는 호환성과 안전성이 완벽한 안드로이드 7버전을 지원되며 완벽한 게임 플레이 만나게 될 겁니다. 게임 유저의 입장에서 설정된 맞춤형 가상키 세팅을 통해서 마침 PC 게임 플레이하고 있는 것처럼 모바일 게임을 플레이하게 될 겁니다.
녹스 앱플레이어에서 멀티 플레이도 지원 가능합니다. 여러 앱과 게임 동시에 실행 가능하며 많은 즐거움을 동시에 누릴 수 있습니다. 녹스는 최강의 안드로이드 모바일 에뮬레이터로써 AMD, Intel 기기와 완벽한 호환성을 가지고 있기에 부드럽고 가벼운 녹스에서 최상의 게임 체험 만나볼수 있을 겁니다. 녹스 앱플레이어, PC에서 즐기는 모바일 라이프! 지금 바로 다운로드하세요!
최신버전의 녹스 앱플레이어에서는 호환성과 안전성이 완벽한 안드로이드 7버전을 지원되며 완벽한 게임 플레이 만나게 될 겁니다. 게임 유저의 입장에서 설정된 맞춤형 가상키 세팅을 통해서 마침 PC 게임 플레이하고 있는 것처럼 모바일 게임을 플레이하게 될 겁니다.
녹스 앱플레이어에서 멀티 플레이도 지원 가능합니다. 여러 앱과 게임 동시에 실행 가능하며 많은 즐거움을 동시에 누릴 수 있습니다. 녹스는 최강의 안드로이드 모바일 에뮬레이터로써 AMD, Intel 기기와 완벽한 호환성을 가지고 있기에 부드럽고 가벼운 녹스에서 최상의 게임 체험 만나볼수 있을 겁니다. 녹스 앱플레이어, PC에서 즐기는 모바일 라이프! 지금 바로 다운로드하세요!
인기 게임
녹스 앱플레이어는 윈도우와 맥 PC에서 실행할 수 있습니다. 컴퓨터로 홈페이지를 방문해 녹스 앱플레이어를 다운로드하세요.